| PART |
Description |
Maker |
| CA3169 CA33169M CA33169 CA3169M |
Supply voltage: Positive: 41V DC; Negative: 1.4V DC; 1.9A; 15W; solenoid and motor driver (1/2 H driver). For latching solenoid driver (single and multiple), non-latching solenoid driver, relay driver, lamp controler, lamp driver, etc.
|
HARRIS[Harris Corporation]
Intersil Corporation
Harris Semiconductor
|
| TND009T TND010F TND011MP TND011NM TND012MP TND012N |
Lamp/ solenoid/ and motor-driving Applications
CONNECTOR ACCESSORY
Low-Side Power Switch for Use in Solenoid/Lamp Drive Applications
Low-Side Power Switch for Use in Solenoid,Lamp Drive Applications
|
Sanyo Electric Co.,Ltd.
SANYO[Sanyo Semicon Device]
|
| TPD1044F |
Low-Side Switch for Motor, Solenoid and Lamp Drive
|
Toshiba Semiconductor
|
| TPD1032F-13 |
2-IN-1 Low-Side Power Switch for Motor, Solenoid and Lamp Drive
|
Toshiba Semiconductor
|
| EN7691 |
Excellent Power Device, Lowside Power Switch Lamp-, Solenoid-, and Motor-Driving, Single MP
|
ON Semiconductor
|
| TPD1030F07 TPD1030F |
2-IN-1 Low-Side Switch for Motor, Solenoid and Lamp Drive
|
Toshiba Semiconductor
|
| FS30KM-03 |
Motor control, Lamp control, Solenoid control DC-DC converter, etc.
|
Mitsubishi Electric Semiconductor
|
| IR8400P |
V(cc): 80V; 5W; quad high side switch. For relay and solenoid drivers, lamp drivers, automotive fuel injector drivers, power supply output switching, motor drivers
|
International Rectifier
|
| 2SD2092 E001159 |
NPN EPITAXIAL TYPE (SWITCHING/ LAMP/ SOLENOID DRIVE APPLICATIONS)
SWITCHING APPLICATIONS LAMP, SOLENOID DRIVE APPLICATIONS
NPN EPITAXIAL TYPE (SWITCHING LAMP SOLENOID DRIVE APPLICATIONS)
From old datasheet system
NPN EPITAXIAL TYPE (SWITCHING, LAMP, SOLENOID DRIVE APPLICATIONS)
|
TOSHIBA[Toshiba Semiconductor]
|
| MIP705 |
Power Device - IPD - For Lamp and Solenoid Driver
|
Panasonic
|
| MIP508 |
Power Device - IPD - For Lamp and Solenoid Driver
|
Panasonic
|
